$15.50
996 in stock
The Aqua OM3 SC Duplex Multimode Adaptor provides accurate alignment and reliable connection of SC Multimode fibre connectors within patch panels, fibre enclosures and optical distribution equipment.
Designed for OM3 Multimode fibre applications, the adaptor features an aqua housing and phosphor bronze alignment sleeves for precise connector alignment and consistent optical performance.
The SC duplex configuration accommodates two fibre connections within a single housing, making it a practical choice for duplex optical links in data centres, telecommunications networks, LAN infrastructure and other Multimode fibre installations.
fibreSales supplies these OM3 SC Duplex Adaptors in convenient packs of 12 for new installations, expansions, maintenance and replacement requirements.
An OM3 SC Duplex Adaptor provides the physical interface required to connect compatible SC Multimode fibre connectors.
The adaptor positions the mating connector ferrules in precise alignment so that optical signals can pass efficiently between the connected fibres.
Because small alignment errors can contribute to optical loss, the internal alignment sleeves play an important role in maintaining consistent connector positioning.
This adaptor uses phosphor bronze alignment sleeves and is intended for OM3 Multimode fibre applications.
A duplex adaptor accommodates two SC fibre connections within one housing.
This makes the configuration particularly useful for duplex optical links where separate fibres carry the transmit and receive signals.
SC connectors use a straightforward push-pull connection format and remain widely used throughout fibre distribution infrastructure.
Common installation locations include:
Choose the Aqua OM3 SC Duplex Adaptor when your network uses OM3 Multimode fibre with SC duplex connectivity and requires phosphor bronze alignment sleeves.
Before ordering, confirm the fibre category, connector type and patch-panel adaptor format against the installed network.
This adaptor is intended for OM3 Multimode optical fibre applications.
OM3 is a laser-optimised Multimode fibre category widely used in higher-speed short-reach optical networks.
Typical environments include:
The aqua housing also provides useful visual identification within Multimode fibre infrastructure.
Colour coding can help technicians identify different fibre systems within racks, patch panels and telecommunications rooms.
The aqua housing suits OM3 Multimode connectivity and helps distinguish these adaptors from beige OM1 components and other fibre configurations.
However, colour alone should never determine compatibility.
Always confirm the actual fibre category, connector type and optical system before making a connection.
The internal sleeve aligns the ferrules of the mating SC connectors.
This adaptor uses phosphor bronze alignment sleeves to maintain the required physical alignment.
Accurate alignment supports:
Correct connector handling and cleanliness remain equally important to overall optical performance.
The supplied specifications state a typical insertion loss of ≤0.2 dB.
Every connection within a fibre network contributes to the total optical loss budget.
These connection points may include:
Therefore, low-loss connectivity helps preserve the optical power available across the complete fibre channel.
The main function of a fibre adaptor is accurate mechanical alignment.
When technicians insert compatible SC connectors into opposite sides of the adaptor, the phosphor bronze sleeve positions the ferrules so the optical fibres align correctly.
High-precision alignment helps maintain consistent performance throughout the fibre connection.
Fibre networks regularly undergo maintenance, upgrades and equipment changes.
As a result, technicians may disconnect and reconnect fibre patch leads many times throughout the life of an installation.
These SC Duplex Adaptors provide excellent interchangeability and repeatability, supporting ongoing network maintenance and reconfiguration.
SC Duplex Adaptors commonly provide the connection interface within fibre patch panels and distribution enclosures.
The duplex format keeps two SC connections together, helping installers organise fibre pairs within the panel.
Typical applications include:
For fibre distribution projects, explore the fibreSales range of Fibre Optic Enclosures.
| Specification | Details |
|---|---|
| Product | Aqua OM3 SC Duplex Multimode Adaptor |
| Connector Type | SC |
| Configuration | Duplex |
| Fibre Application | Multimode |
| Fibre Category | OM3 |
| Housing Colour | Aqua |
| Alignment Sleeve | Phosphor Bronze |
| Typical Insertion Loss | ≤0.2 dB |
| Flammability Requirement | UL94-V0 |
| Alignment | High Precision |
| Interchangeability | Excellent |
| Repeatability | Excellent |
| Temperature Characteristic | Good |
| Pack Quantity | 12 Adaptors |
The supplied product specifications identify compliance with requirements including:
For installations that require compliance with a particular standard, edition or project specification, confirm the exact requirements before installation.
The Aqua OM3 SC Duplex Multimode Adaptor can support fibre connectivity across:
OM3 Multimode fibre is widely used for short-reach optical connections within data centres and enterprise networks.
The correct supported speed and distance depend on the Ethernet standard, optical transceivers, total channel loss and complete network design.
Therefore, installers should select every component as part of the complete optical channel rather than relying on the fibre category alone.
The Aqua OM3 SC Duplex Adaptor provides the physical SC-to-SC connection point where the network design requires duplex OM3 connectivity.
fibreSales supplies these adaptors in a convenient 12-pack.
The pack format suits:
Keeping additional adaptors available can also help reduce delays when technicians need to replace damaged components during network maintenance.
The correct adaptor should match the fibre infrastructure.
| Feature | OM3 SC Duplex | OM1 SC Duplex |
|---|---|---|
| Fibre Type | Multimode | Multimode |
| Fibre Category | OM3 | OM1 |
| Typical Identification Colour | Aqua | Beige |
| Connector Format | SC Duplex | SC Duplex |
| Alignment Sleeve | Phosphor Bronze | Phosphor Bronze |
| Typical Insertion Loss | ≤0.2 dB | ≤0.2 dB |
| Primary Use | OM3 networks | OM1 networks |
While both products use SC duplex connectivity, select the adaptor appropriate for the fibre infrastructure and project requirements.
LC and SC adaptors perform the same fundamental role of aligning compatible fibre connectors, but they use different physical connector formats.
SC connectors use a larger push-pull design, while LC connectors use a smaller form factor that can provide greater port density.
Therefore, select the adaptor that matches:
Fibre connector contamination can increase optical loss and affect network performance.
Therefore, technicians should inspect and clean connectors as required before mating them through an adaptor.
A practical process includes:
fibreSales supplies Fibre Cleaning Products and Fibre Inspection Microscopes for professional fibre connector maintenance.
Before ordering, confirm four important requirements.
This product is designed for OM3 Multimode fibre.
The adaptor uses SC connectivity.
The duplex housing accommodates two fibre connections.
This adaptor uses phosphor bronze alignment sleeves.
Selecting the correct combination helps maintain consistency throughout the installed fibre network.
Complete your OM3 fibre installation with:
fibreSales supplies fibre optic connectivity, installation, cleaning and testing products for Australian telecommunications and data networks.
The Aqua OM3 SC Duplex Multimode Adaptor provides:
These features make it a practical component for new OM3 installations, expansions and ongoing network maintenance.
It is a fibre optic adaptor designed to align and connect compatible SC connectors within an OM3 Multimode fibre network.
Yes. It is intended for Multimode fibre applications.
This product is intended for OM3 Multimode fibre.
The housing is aqua.
It uses phosphor bronze alignment sleeves.
The supplied specification states ≤0.2 dB typical insertion loss.
It is an SC Duplex Adaptor.
The duplex configuration accommodates two SC fibre connections.
Each pack contains 12 adaptors.
Yes, provided the panel accepts the corresponding SC Duplex adaptor format.
They can suit data centre installations that use compatible OM3 Multimode fibre and SC duplex connectivity.
Both provide SC Duplex Multimode connectivity, but the beige version is intended for OM1 infrastructure while this aqua version is intended for OM3 applications.
Yes. Inspect and clean fibre connectors as required before connection.
Build or maintain your OM3 Multimode network with the Aqua OM3 SC Duplex Multimode Adaptor with Phosphor Bronze Alignment Sleeves – 12 Pack from fibreSales.
With high-precision alignment, phosphor bronze sleeves and typical insertion loss ≤0.2 dB, these adaptors provide reliable SC Duplex connectivity for OM3 Multimode fibre infrastructure.
Order your 12-pack online from fibreSales.
The Aqua OM3 SC Duplex Multimode Adaptor provides a reliable connection point for SC-based OM3 fibre infrastructure.
Phosphor bronze alignment sleeves help maintain accurate connector positioning, while typical insertion loss of ≤0.2 dB supports low-loss optical connectivity.
Furthermore, the duplex configuration accommodates two SC fibre connections within one housing, making it practical for patch panels, enclosures and fibre distribution equipment.
Supplied in packs of 12, these adaptors suit new OM3 installations, network expansions, maintenance and replacement requirements.
For more fibre optic solutions, technical resources, and installation products, visit www.fibresales.com.au.