$38.60
2 in stock
The Fibre Optic Cleaver Blade provides a replacement blade for compatible fibre optic cleave tools used during fibre preparation, termination and fusion splicing.
A fibre cleaver relies on a precision blade to score the glass fibre before the cleaving mechanism creates the required fibre end face. Therefore, maintaining the blade in suitable condition plays an important role in achieving consistent fibre preparation.
Replacing a worn or damaged blade can restore the cleaver’s cutting component without requiring replacement of the complete cleave tool.
A Fibre Optic Cleaver Blade is the precision cutting component within a compatible fibre cleave tool.
During the cleaving process, the blade scores the prepared glass fibre. The cleaver mechanism then applies controlled force to produce the fibre end face required for the next stage of installation or splicing.
Because the blade performs this precision function repeatedly, its condition can affect cleave consistency over time.
Fusion splicing and fibre termination depend on correctly prepared fibre.
A worn, damaged or contaminated blade can contribute to inconsistent cleave results. Consequently, technicians should inspect and maintain the cleaver when fibre preparation quality begins to change.
Potential signs that the cleaver requires attention include:
However, blade condition is only one possible cause of poor cleave performance. Fibre preparation, contamination, cleaver adjustment and the mechanical condition of the tool can also influence results.
Choose this replacement Fibre Optic Cleaver Blade when the existing blade in a compatible fibre optic cleave tool requires replacement because of wear, damage or maintenance requirements.
Confirm blade compatibility with the specific cleave tool before ordering.
Replacing the blade allows technicians to maintain compatible cleaving equipment rather than automatically replacing the entire tool.
This approach can be particularly useful for technicians who regularly perform:
Keeping a compatible replacement blade available can also reduce delays when an existing cleaver blade reaches the end of its usable service life.
Fibre cleaving forms a critical preparation stage before fusion splicing.
A typical preparation process includes:
The cleaver blade therefore performs an important mechanical function before the fusion splicer begins the actual splicing process.
Replacement requirements depend on blade condition, cleaver use and the maintenance procedure for the specific tool.
Consider inspecting the blade when cleave quality becomes inconsistent or when routine maintenance identifies wear or damage.
Before replacing the blade, also check:
If these areas are correct and the blade no longer produces suitable results, replacement may be necessary.
Some compatible cleaver blade maintenance procedures may allow blade polishing before replacement becomes necessary.
fibreSales also supplies a Polishing Puck for Fibre Optic Cleaver Blades – 16 Rotations for compatible blade maintenance applications.
Polishing and replacement serve different purposes.
| Maintenance Option | Purpose |
|---|---|
| Blade Polishing | Maintains a compatible blade when the applicable procedure permits polishing |
| Blade Replacement | Replaces a blade that has reached the appropriate replacement point |
Do not continue polishing a blade that requires replacement because of its condition.
| Specification | Details |
|---|---|
| Product | Fibre Optic Cleaver Blade |
| Product Type | Replacement Cleaver Blade |
| Application | Fibre Optic Cleaving |
| Use | Fibre Preparation |
| Equipment Type | Compatible Fibre Optic Cleave Tool |
| Maintenance Application | Cleaver Blade Replacement |
| Suitable Work | Fibre Installation, Termination and Fusion Splicing |
The replacement cleaver blade suits compatible equipment used for:
Always confirm compatibility with the specific fibre cleaver before installation.
Blade replacement requires careful handling because the component performs a precision cutting function.
Before replacement:
Never force an incompatible blade into the cleaver.
Contamination can affect fibre preparation as well as other stages of fibre installation.
Keep the cleaver and its working area clean according to the equipment maintenance procedure. In addition, clean the bare fibre correctly before cleaving.
fibreSales supplies Fibre Cleaning Products for professional fibre preparation and maintenance.
Repeated use can eventually reduce blade performance. Replace the blade when its condition or the cleaver maintenance procedure requires it.
Debris around the blade or cleaving mechanism can interfere with fibre preparation. Clean the tool according to the appropriate maintenance procedure.
Blade positioning can affect cleaver operation. Check the blade setup before assuming the replacement blade has a fault.
Incorrect stripping or cleaning can contribute to poor cleave results even when the blade remains in suitable condition.
Do not assume that every fibre cleaver uses the same blade. Confirm compatibility before ordering or installation.
A failed or worn cleaver blade can interrupt fibre installation and splicing work.
Keeping a compatible replacement blade in the technician’s toolkit provides a practical backup for field and workshop operations.
This can be especially useful during:
A small replacement component can therefore help reduce unnecessary disruption when blade replacement becomes necessary.
Complete your fibre preparation and splicing toolkit with:
fibreSales supplies fibre optic installation, preparation, splicing, cleaning and testing products for Australian telecommunications and network infrastructure.
This Fibre Optic Cleaver Blade provides a replacement cutting component for compatible fibre cleave tools, helping technicians maintain essential fibre preparation equipment.
Keeping replacement blades and maintenance accessories available also helps support efficient field and workshop operations.
It is the precision blade inside a fibre cleave tool that scores the prepared glass fibre during the cleaving process.
The blade replaces a worn or damaged blade in a compatible fibre optic cleave tool.
Correct fibre preparation is important for subsequent processes such as fusion splicing and fibre termination.
Replace the blade when its condition or the maintenance procedure for the specific cleaver indicates that replacement is necessary.
Blade wear can contribute to inconsistent cleave quality. However, contamination, adjustment, fibre preparation and other mechanical factors can also affect results.
Some compatible blades and maintenance procedures may permit polishing. Replace the blade when polishing no longer provides the required result or when the applicable maintenance procedure calls for replacement.
Yes. fibreSales supplies a Polishing Puck for Fibre Optic Cleaver Blades – 16 Rotations for compatible blade maintenance.
Yes. Technicians cleave the prepared fibre before positioning it in the fusion splicer.
Do not assume universal compatibility. Confirm that the blade suits the specific fibre optic cleave tool before ordering.
A spare compatible blade can help reduce downtime during fibre installation, maintenance and splicing projects.
Maintain your fibre preparation equipment with a replacement Fibre Optic Cleaver Blade from fibreSales.
The blade provides the precision cutting component required by a compatible fibre optic cleave tool and supports fibre preparation for installation, termination and fusion splicing work.
Confirm compatibility with your cleaver before ordering.
The Fibre Optic Cleaver Blade provides a replacement cutting component for compatible fibre optic cleave tools.
Maintaining the cleaver blade helps technicians support consistent fibre preparation during installation, termination and fusion splicing. When the existing blade becomes worn or damaged, replacing the component can restore the cleaver without requiring replacement of the complete tool.
For more fibre optic solutions, technical resources, and installation products, visit www.fibresales.com.au.