$17.50
999 in stock
T-SC Simplex Adaptor ST Male-SC Female
The ST-SC Multimode Simplex Adaptor provides an ST Male to SC Female interface for connecting compatible ST and SC components within a multimode fibre optic network.
Unlike a standard same-connector fibre adaptor, this hybrid configuration allows technicians to transition between different connector interfaces without changing the existing fibre connector or equipment interface.
Its simplex design supports a single fibre connection, making the adaptor a practical solution for legacy equipment integration, fibre network maintenance, testing and other applications requiring an ST-to-SC transition.
An ST-SC fibre adaptor provides a transition between two different fibre connector interfaces.
This model has:
ST Male → SC Female
The ST side provides the male interface, while the SC side accepts a compatible SC connector.
Because the adaptor bridges two connector formats, installers can use it where existing equipment or cabling presents an ST interface but the connecting fibre component uses SC.
Connector gender and interface direction matter when selecting a hybrid fibre adaptor.
For this product, the configuration is specifically:
| Side | Interface |
|---|---|
| Side 1 | ST Male |
| Side 2 | SC Female |
| Fibre Type | Multimode |
| Configuration | Simplex |
Confirm both sides of the intended connection before ordering.
Choose the ST-SC Multimode Simplex Adaptor when your application requires an ST Male interface on one side and an SC Female interface on the other within a compatible multimode fibre system.
Do not select the adaptor solely because the network uses ST and SC connectors. The male/female orientation must also match the equipment and cable interfaces.
Existing fibre networks can contain several connector formats.
ST connectivity remains present in many established fibre installations and equipment interfaces, while SC connectors also appear extensively throughout fibre infrastructure.
Replacing an entire cable or equipment interface simply because the connector formats differ may not always provide the most practical solution.
Instead, a suitable hybrid adaptor can provide the required physical transition.
Typical reasons to use an ST-SC adaptor include:
This adaptor uses a simplex configuration, meaning it supports one fibre path through the adaptor.
Simplex and duplex describe the number of fibre connections rather than the fibre mode.
Therefore, this product combines:
Multimode fibre compatibility + Simplex connection + ST Male to SC Female interfaces.
Confirm all three characteristics against the intended application before ordering.
This ST-SC adaptor is intended for multimode fibre connectivity.
When integrating it into an existing network, make sure the complete optical link uses compatible fibre and optical components.
The adaptor changes the physical connector interface. It does not convert one optical fibre type into another.
For example, an adaptor cannot convert multimode optical transmission into singlemode transmission.
The ST-SC adaptor contains no active electronics and performs no electrical or optical signal conversion.
Instead, it provides a physical fibre connection between compatible interfaces.
That distinction matters because terms such as “converter” can sometimes refer to powered equipment that converts Ethernet or other signals between copper and fibre.
This product is a passive fibre optic adaptor.
| Specification | Details |
|---|---|
| Product | ST-SC Multimode Simplex Adaptor |
| Adaptor Type | Hybrid Fibre Optic Adaptor |
| Side 1 | ST Male |
| Side 2 | SC Female |
| Fibre Type | Multimode |
| Configuration | Simplex |
| Operation | Passive |
| Application | Fibre Connector Interface Transition |
| Connection | ST to SC |
The ST-SC Multimode Simplex Adaptor can suit compatible applications involving:
Its hybrid interface makes it particularly useful where replacing existing connectors or equipment would be unnecessary.
These connectors use different physical connection mechanisms.
ST connectivity uses a bayonet-style coupling arrangement that secures the connector through a twist-lock action.
SC connectivity uses a push-pull connector format.
The ST-SC adaptor provides the physical transition required between these two different interface styles while maintaining a fibre connection through the component.
Hybrid adaptors require more careful selection than standard same-format adaptors.
Before ordering, check:
If all five conditions match, this ST-SC configuration provides the required physical interface.
An ST-SC patch lead and an ST-SC adaptor solve related but different connection requirements.
| Product | Purpose |
|---|---|
| ST-SC Hybrid Adaptor | Provides a compact physical transition between compatible ST and SC interfaces |
| ST-SC Patch Lead | Provides a length of fibre cable terminated with ST and SC connectors |
Choose according to the physical connection required by the network.
Clean fibre interfaces remain essential regardless of connector type.
Dust, oils and other contamination can affect optical performance. Therefore, inspect and clean compatible fibre connectors before making the final connection.
Good practice includes:
Explore fibreSales Fibre Cleaning Products for fibre connector maintenance.
This adaptor specifically provides ST Male to SC Female connectivity. Check the mating interfaces before ordering.
This model suits multimode fibre applications. An adaptor does not convert multimode transmission into singlemode.
These terms describe different characteristics. Multimode identifies the fibre type, while simplex describes the single fibre connection.
Hybrid adaptors can differ in interface orientation and other characteristics. Match the actual product configuration to the application.
Even the correct adaptor cannot compensate for contaminated fibre interfaces. Inspect and clean connectors as part of normal installation practice.
Complete your fibre connectivity and maintenance requirements with:
fibreSales supplies fibre optic connectivity, installation, cleaning and testing products for Australian telecommunications and network infrastructure.
The ST-SC Multimode Simplex Adaptor provides a straightforward way to transition between compatible ST and SC interfaces without introducing an active conversion device.
Its clearly defined ST Male to SC Female configuration also helps technicians select the correct hybrid interface for existing multimode fibre infrastructure.
An ST-SC adaptor provides a physical fibre connection between compatible ST and SC interfaces.
This model has an ST Male interface and an SC Female interface.
This product is for multimode fibre applications.
Yes. It uses a simplex, single-fibre configuration.
No. The adaptor changes the physical connector interface; it does not convert the optical transmission mode.
No. It is a passive fibre optic adaptor and contains no active signal-conversion electronics.
It can provide a practical interface when existing equipment or fibre infrastructure uses ST on one side and SC on the other.
Do not assume that the opposite interface arrangement will work for the same application. Match the adaptor to the actual mating interfaces.
Applications can include existing fibre networks, telecommunications infrastructure, testing, maintenance, industrial networks and legacy equipment integration.
Yes. Inspect and clean the connector end faces as required before making the final optical connection.
Connect compatible ST and SC fibre interfaces with the ST-SC Multimode Simplex Adaptor – ST Male to SC Female from fibreSales.
Its hybrid design provides a compact passive solution for transitioning between two different connector interfaces within compatible multimode fibre infrastructure.
Before ordering, confirm the multimode fibre type, simplex configuration and ST Male to SC Female interface orientation against your equipment and cabling.
The ST-SC Multimode Simplex Adaptor provides a practical connection between compatible ST and SC interfaces in multimode fibre networks.
With an ST Male interface on one side and SC Female interface on the other, the adaptor can help integrate different connector formats without requiring active conversion equipment.
Its simplex configuration makes it suitable for applications requiring a single fibre connection, while the hybrid interface can simplify maintenance, equipment integration and upgrades within existing fibre infrastructure.
For more fibre optic solutions, technical resources, and installation products, visit www.fibresales.com.au.