$12.00
999 in stock
The Coaxial Cable Stripper provides a simple and adjustable way to prepare common coaxial cables for termination. Designed for RG58 (3C2V), RG59/62 and RG6, the handheld tool uses a double-blade stripping system to remove selected sections of cable insulation quickly and consistently.
Its adjustable design supports 4 mm, 6 mm, 8 mm and 12 mm stripping lengths, allowing installers to prepare the cable according to the termination requirements.
Two blades allow the stripper to remove sections of the cable covering as the tool rotates around the coaxial cable.
Unlike a fixed stripping tool, the adjustable mechanism lets the installer configure the stripper for the cable and required preparation length.
Correct adjustment remains important because coaxial cable contains several layers. Excessive blade depth may damage the braid, shielding or centre conductor, while insufficient depth can leave material that must be removed manually.
Choose this coaxial cable stripper when you need an adjustable hand tool for preparing RG58, RG59, RG62 or RG6 coaxial cable with selectable 4, 6, 8 or 12 mm stripping lengths.
| Cable Type | Supported |
|---|---|
| RG58 (3C2V) | Yes |
| RG59 | Yes |
| RG62 | Yes |
| RG6 | Yes |
Cable construction can vary between manufacturers. Therefore, adjust the blades to suit the actual cable before completing repetitive stripping work.
The tool supports four stated insulation-removal lengths:
| Stripping Length | Adjustment |
|---|---|
| 4 mm | Adjustable |
| 6 mm | Adjustable |
| 8 mm | Adjustable |
| 12 mm | Adjustable |
Select the appropriate preparation length according to the connector and termination method being used.
Operation requires only a few basic steps:
For the first termination on a particular cable, inspect the result carefully and fine-tune the blade adjustment where necessary.
A coaxial cable contains more than an outer jacket. Depending on its construction, the cable also incorporates shielding, dielectric material and a centre conductor.
Consequently, correct blade adjustment helps remove the intended material without unnecessarily damaging the layers that need to remain intact.
When changing between RG cable types, check the adjustment again rather than assuming the previous setting remains suitable.
| Specification | Details |
|---|---|
| Product Type | Coaxial Wire & Cable Stripper |
| Stripping System | Double Blade |
| Adjustment | Fully Adjustable |
| Compatible Cable | RG58 (3C2V), RG59, RG62, RG6 |
| Selectable Stripping Lengths | 4 mm, 6 mm, 8 mm, 12 mm |
| Operation | Lock, rotate clockwise and remove stripped section |
| Tool Type | Hand-operated coaxial cable preparation tool |
This coaxial stripping tool suits cable preparation for applications involving compatible:
The final suitability depends on the cable construction and connector termination requirements.
Excessive blade depth can damage cable layers that need to remain intact. Start cautiously and inspect the first stripped cable.
RG58, RG59, RG62 and RG6 do not necessarily share identical construction. Check the blade adjustment whenever the cable changes.
Inspect the stripped cable before fitting the connector. Look for damage to the centre conductor, shielding or other required cable components.
Match the 4, 6, 8 or 12 mm setting to the termination being installed rather than selecting a length arbitrarily.
A general-purpose cable stripper may suit many everyday cable-preparation jobs. However, coaxial cable has a layered construction that requires more controlled preparation.
This tool specifically supports the stated RG58, RG59, RG62 and RG6 coaxial cable types and provides adjustable stripping lengths for coaxial termination work.
fibreSales supplies installation, termination and testing tools for telecommunications and data cabling applications.
This adjustable coaxial stripper gives technicians a straightforward tool for preparing several commonly used RG cable types without requiring a separate stripper for each stated cable.
The supplied specifications list RG58 (3C2V), RG59, RG62 and RG6.
Yes. It has a fully adjustable design.
The tool uses a double-blade stripping system.
The stated insulation-removal lengths are 4 mm, 6 mm, 8 mm and 12 mm.
Yes. RG6 is one of the specified compatible cable types.
Yes. The stripper supports RG59 coaxial cable.
Yes. The specifications identify RG58 (3C2V) as compatible.
Yes. RG62 is also included in the supported cable list.
Lock the stripper over the cable, rotate it clockwise and then pull away the unwanted section.
Yes. Cable construction can differ, so check and adjust the blade setting before processing multiple cables.
Prepare RG58, RG59, RG62 and RG6 coaxial cables with a compact, adjustable hand tool.
The double-blade system and selectable 4, 6, 8 and 12 mm stripping lengths make the stripper a practical choice for installers who work across several common coaxial cable formats.
The Coaxial Cable Stripper provides adjustable cable preparation for RG58 (3C2V), RG59, RG62 and RG6 coaxial cables.
Its double-blade configuration combines with selectable 4, 6, 8 and 12 mm stripping lengths to give technicians greater control over cable preparation. Operation remains straightforward: adjust the tool, lock it around the cable, rotate clockwise and remove the unwanted material.
For more fibre optic solutions, technical resources, and installation products, visit www.fibresales.com.au.